CABINET MOUNTED CHLORINATORS Capacities Upto 200 Kg/Hr Model R-103
|Model R-103 floor cabinet mounted chlorinators are vacuum operated, solution feed devices available with wall mounted remote vacuum regulator. The injector is floor mounted, away from the Chlorinator cabinet, which houses a Rotameter, a flow control valve, a differential regulator and a vacuum relief valve.
REMOTE VACUUM REGULATOR
Exclusively designed remote vacuum regulator is a vacuum-to-open and normally closed. It continuously monitors vacuum and regulates gas flow to a closely controlled value. When located as close as possible to the source of gas supply, the risk of handling gas under pressure is reduced to a minimum.
Capacities up to 40 Kg/hr of chlorine have a fixed throat. Capacities of 50 kg/hr chlorine and above are equipped with variable orifices, which may be achieved by a throttle valve on injector, so that water consumption may if necessary reduced to a minimum. Water passing through injector should reasonably clean.
INJECTORS ARE SELECTED TO CREATE VACUUM AND TO LIMIT CHLORINE SOLUTION STRENGTH TO 3500 ppm AT 25 C OR 2500 ppm AT 40 C AT HIGHER CONCENTRATIONS MOLECULAR CHLOLRINE BREAKS AND FUMES AT THE POINT OF APPLICATION, CAUSING INEFFICIENT MIXING OF CHLORINE.
IEC Chlorinator Model R-103 have flow meters for a maximum capacity of 1,2,3,4,5,10,20,30,40,50,75,100,150 & 180 kg/hr of chlorine gas. Feed range is 20:1 for any flow meter. The flow meter has an accuracy of ± 4% of the indicated flow. The float and packing are made of PTFE.
The system is provided with a check valve, vacuum relief valve, and emergency drain relief valve.
Water passes through the injector to produce vacuum. This vacuum opens the check valve and extends the vacuum up to the remote vacuum regulator. The chlorine supply under pressure is reduced to a constant vacuum at the remote vacuum regulator. The gas under vacuum is controlled at the gas flow meter and flow control valve to differential regulator which maintains a constant vacuum differential. The chlorine solution is then discharged from the injector to the point of application.
With Standard accessories :
One - Wall mounted remote vacuum
regulator with diaphragm pressure
One - Pressure relief valve
One - Fibre glass floor mounted
cabinet rear - open, for easy
accessibility and service.
One - Rotameter
One - Flow Control Valve
One - Differential Regulator
One - Vacuum Relief Valve
Req.- Inter Connecting Piping inside
One -Check Valve and Emergency
Drain Relief Valve Assembly.
Not included unless specifically offered :
- Vacuum gauge on injector vacuum line
- Vacuum switch for chlorine service
- Water Pressure gauge on injector water inlet
- Pressure switch for injector water supply
- Rubber lined diaphragm valve on injector solution outlet.